Sun plate introduction: Hezhongliantuo sun plate (also known as hollow sun plate, EC sun plate, mining plate, etc.) is a high performance engineering plastic polycarbonate raw material production. With impact resistance, good toughness, transparent lighting, long weathering life and many other characteristics, is a kind of high-tech, comprehensive performance is extremely excellent, energy conservation and environmental protection plastic sheet.
PC sunshine board is commonly used in the international plastic building materials, the use is very wide, there are other building decoration materials (such as glass, plexiglass, etc.) incomparable advantages. Widely used in greenhouse/industrial plant, parking shed, access. The daylighting ceiling of the road, the daylighting ceiling of the commercial building, the daylighting ceiling of the exhibition hall, the daylighting ceiling of the sports hall, the daylighting ceiling of the commercial building and the sports hall, the agricultural greenhouse, the breeding industry and the flowers greenhouses, as well as the daylighting coverage of the public facilities such as the telephone event, the newspaper event, the sunshine board canopy and the station.
(1) Light transmittance: PC sunshine board light transmittance up to 89%. Uv anti-UV coating in the sun will not produce yellow, atomization, poor light transmission, ten years after the loss of light only 6%.
(2) Impact resistance. The impact strength is 50-300 times that of ordinary glass, 30 times that of acrylic plate of the same thickness, 2-20 times that of copperized glass, and there is no crack when falling with a B3kg hammer two meters below, which can better cope with severe weather such as hail.
(3) Anti-UV, uPLink solar panel is coated with anti-UV coating on one side, and has anti-condensation treatment on the other side. It integrates anti-UV, heat insulation and anti-drip functions in the body, and can block the ultraviolet rays from passing through.
(4) Light weight: the specific gravity is only 1.5-3.0kC/m2, saving the cost of transportation, unloading, installation and supporting the frame.
(5) Flame retardant: national standard GB50222 9 confirmed, eC plate difficult combustion level. PC board its own ignition point is 580C, from the fire after extinguishing, burning will not produce toxic gas, will not contribute to the spread of the fire.
(6) Flexibility. Cold bending method can be adopted on site according to design drawing. Install into an arched, semicircular top and face. The minimum bending radius is 175 times the thickness of the solar panel.
(7) energy saving: summer cool, winter insulation,PC board is lower than ordinary glass and other plastic thermal conductivity (K value), heat insulation effect is higher than the same glass 7%-25%,PC board heat insulation up to 49%. Thus the heat loss is greatly reduced, used in buildings with heating equipment, is an environmentally friendly material.
(8) Temperature adaptability: The sunshine plate does not become brittle at -40C and does not soften at 125C. There is no obvious change in its mechanics and mechanical properties in a harsh environment.
(9) Weather resistance: It can maintain stable physical performance in a range of 40C to 120C. Artificial aging test lasted for 4000 hours, the yellow degree was 2, and the reduced light transmittance was only 0.6%. .
(10) Anti-condensation: When the outdoor temperature is 0C and the indoor temperature is 23C, and the indoor relative humidity is less than 80%, the inner surface of the anti-cloud drop sun plate will not be dewy.